午夜在线不卡精品国产婷婷_亚洲一级黄色毛片全部_毛片大全**在线_最新av一区二区三区影院_一本大道大色av香蕉网_麻豆国产av尤物网尤物_午夜爱爱免费视频无遮挡_717影院理论午夜论不卞_最近2019年中文字幕完整版免费_一个人的视频www片免费

PT100-T1溫度傳感器
    采用進口PT100鉑電阻/J、K、E型熱電偶溫度芯體;
    選進的貼片工藝,具有零點、滿量程、溫度補償;
    精度等級:B級、A級、1/3B級可選;
    產品響應快速,反應靈敏,精度高;
    結構多樣化:螺紋活套式安裝,產品安裝方向可調;
    產品優勢:

    PT100-T1 溫度傳感器


    型號:PT100-T1溫度傳感器
    采用進口PT100鉑電阻/J、K、E型熱電偶溫度芯體;
    選進的貼片工藝,具有零點、滿量程、溫度補償;
    精度等級:B級、A級、1/3B級可選;
    產品響應快速,反應靈敏,精度高;
    結構多樣化:螺紋活套式安裝,產品安裝方向可調;
    氣連接IP65/68,二線/三芯/四芯屏蔽溫度補償線; 
    304/316/剛玉管/合金等制定材料外殼; 
    溫度范圍:-50℃ ~0~100℃~500℃;
    探桿長度/直徑/螺紋規格可制定;
    可替代國外同類型高壓產品;

    PT100-T1溫度傳感器
    主要應用:
    環境溫度/大棚溫度監控; 
    設備溫度監控;
    自動化/農業/化工/電力/氣象等領域的溫度測量與控制

    Model: PT100-T1 temperature sensor

    Imported PT100 platinum resistor / J, K and e thermocouple temperature core is adopted;
    The selected patch process has zero point, full scale and temperature compensation;
    Accuracy grade: Grade B, Grade A and grade 1 / 3b are optional;
    The product has fast response, sensitive response and high precision;
    Diversified structure: thread installation type, armored type, patch type, plug-in type, flange type, etc;
    Air connection IP65 / 68, two wire / three core / four core shielded temperature compensation wire;
    304 / 316 / corundum tube / alloy and other shell materials;
    Temperature range: - 198 ℃ ~ - 40 ℃ ~ 0 ~ 100 ℃ ~ 500 ℃ ~ 1000 ℃;
    Probe rod length / diameter / thread specification / flange size can be formulated;
    It can replace foreign high-voltage products of the same type;

    PT100-T1 temperature sensor Main applications:

    Temperature measurement and monitoring of inner cavity of pipeline / equipment;
    Equipment temperature monitoring;
    Temperature measurement and control in automation / Agriculture / chemical industry / electric power / meteorology and other fields


    應用領域:
    • 智慧消防

    • 蒸汽供給系統

    • 冶金設備

    • 石油化工

    規格參數

    PT100-T1溫度傳感器


    主要技術參數
    測量介質:液體、氣體(與產品過程連接材料兼容)
    壓力形式:表壓、絕壓

    量    程:
    -50℃~100℃/主要測量環境溫度;
    0℃~100℃~~500℃/PT100型測量高溫介質溫度;
    0℃~500℃/熱電偶型測量高溫/超高溫介質溫度;

    綜合精度:
    PT100類型:A級,B級,1/3B級
    熱電偶類型:Ⅰ級,Ⅱ級,Ⅲ級

    輸出信號:
    PT100類型:電阻信號(參照分度表)
    PT1000類型:電阻信號(參照分度表)
    熱電偶類型:mV電壓信號(參照分度表)
    絕緣阻抗:≥1000 MΩ/100VDC

    介質溫度:
    -50℃~100℃/主要測量環境溫度;
    0℃~100℃~~500℃/PT100型測量高溫介質溫度;
    0℃~500℃~1000℃/熱電偶型測量高溫/超高溫介質溫度;
    環境溫度:-40~70℃
    穩 定 性:≤±0.5%FS/年
    振動影響:≤±0.25%FS/年(機械振動頻率20Hz~1000Hz)
    耐壓壓力:通用小于10個大氣壓,特殊要求需定制
    防護等級:IP65/IP68
    連接材料:304/316L/剛玉等
    過程連接:M20X1.5,G1/2,用戶制訂規格




    Measuring medium: liquid and gas (compatible with product process connecting materials)

    Pressure form: gauge pressure and absolute pressure

    Range:
    -50 ℃ ~ 100 ℃ / mainly measuring ambient temperature;
    0 ℃ ~ 100 ℃ ~ 500 ℃ / PT100 type measures the temperature of high-temperature medium;
    0 ℃ ~ 500 ℃ ~ 1000 ℃ / thermocouple type to measure the temperature of high temperature / ultra-high temperature medium;

    Comprehensive accuracy:
    PT100 type: Class A, class B, class 1 / 3B
    Thermocouple type: class I, II and III

    Output signal:
    PT100 type: resistance signal (refer to the graduation table)
    PT1000 type: resistance signal (refer to the graduation table)
    Thermocouple type: MV voltage signal (refer to the graduation table)
    Insulation impedance: ≥ 1000 m Ω / 100VDC

    Medium temperature:
    -50 ℃ ~ 100 ℃ / mainly measuring ambient temperature;
    0 ℃ ~ 100 ℃ ~ 500 ℃ / PT100 type measures the temperature of high-temperature medium;
    0 ℃ ~ 500 ℃ ~ 1000 ℃ / thermocouple type to measure the temperature of high temperature / ultra-high temperature medium;

    Ambient temperature: - 40 ~ 70 ℃
    Stability: ≤± 0.5% FS / year
    Vibration influence: ≤± 0.25% FS / year (mechanical vibration frequency 20Hz ~ 1000Hz)
    Withstand pressure: less than 10 atmospheres in general, customized for special requirements
    Protection grade: IP65 / IP68
    Connecting material: 304 / 316L / corundum, etc
    Process connection: m20x1 5. G1 / 2, specifications formulated by users


    訂購注意事項
    PT100-T1溫度傳感器產品訂購注意事項

    1、產品量程選擇:
       為了使產品精度、壽命、穩定性等功能達到最佳效果,產品的量程選   擇參照以下公式計算:
       量程 = 系統最大溫度 X (1.2-1.5)倍;
       產品的實際測量壓力范圍,應該在量程范圍的15%-80%;

    2、產品輸出/精度等級/采集方式:
       不同產品規格,精度等級不一樣:
       PT100類型:A級,B級,1/3B級
       熱電偶類型:Ⅰ級,Ⅱ級,Ⅲ級
       溫度傳感器的后端采集方式要與傳感器的輸出匹配
       PT100類型:電阻信號,采集儀表或輸入模塊或板需要可采集PT100的電阻信號;
       PT1000類型:電阻信號,采集儀表或輸入模塊或板需要可采集PT1000的電阻信號;
       熱電偶類型:mV電壓信號,采集儀表或輸入模塊或板需要可采集熱電偶的信號;


    3、用戶要了解產品的測量介質特性:
       介質規格、介質溫度、介質純度(是否含有雜質或顆粒等);

    4、用戶要了解產品的安裝環境及安裝方式:
       室內或室外安裝;
       環境溫度;
       要求的密封等級;
       設備的振動范圍;
       壓力密封方式:錐度密封、端面密封、弧面密封、球面密封;
       安裝空間是否滿足產品外形尺寸;


    Precautions for ordering PT100-T1 temperature sensor

    1. Product range selection:
    In order to achieve the best effect of product accuracy, service life, stability and other functions, the range of the product is calculated according to the following formula:
    Range = x (1.2-1.5) times the maximum temperature of the system;
    The actual measuring pressure range of the product should be 15% - 80% of the measuring range;

    2. Product output / accuracy level / acquisition method:
    Different product specifications and accuracy levels:
    PT100 type: Class A, class B, class 1 / 3B
    Thermocouple type: class I, II and III
    The back-end acquisition mode of the temperature sensor shall match the output of the sensor
    PT100 type: resistance signal. The resistance signal of Pt100 can be collected as required by the acquisition instrument or input module or board;
    PT1000 type: resistance signal. The resistance signal of PT1000 can be collected as required by the acquisition instrument or input module or board;
    Thermocouple type: MV voltage signal. The signal of thermocouple can be collected as required by the acquisition instrument or input module or board;

    3. Users need to understand the characteristics of the measuring medium of the product:
    Medium specification, medium temperature, medium purity (whether it contains impurities or particles, etc.);

    4. Users should understand the installation environment and installation method of the product:
    Indoor or outdoor installation;
    Ambient temperature;
    Sealing grade requirements;
    Vibration range of equipment;
    Pressure seal mode: taper seal, end face seal, arc seal and spherical seal;
    Whether the installation space meets the overall dimension of the product;

    使用注意事項
    PT100-T1溫度傳感器使用注意事項

    安裝使用請,核對產品標牌及合格證相關參數與使用工況是否相符合;熱電阻/熱電偶安裝時,其插入深度不小于熱電阻保護管外徑的8倍~10倍;
    盡可能使熱電阻/熱電偶受熱部分增長;
    熱電阻/熱電偶盡可能垂直安裝,以防在高溫下彎曲變形。
    熱電阻/熱電偶使用中為了減小誤差,應盡量使保護套管表面和被測介質溫度接近;
    產品安裝時,受力部位為“過程連接六方扳手位”,扳手規格與六方相對應;
    嚴禁被測系統的介質溫度、壓力量程、激勵電壓超過變送器的額定使用范圍;
    注意保護傳感器/變送器電纜線或補償導線;
    盡量避免直接接近引起干擾的用戶裝置或電器;


    Precautions for use of Pt100-T1 temperature sensor

    For installation and use, please check whether the relevant parameters of the product label and certificate are consistent with the operating conditions;
    When the thermal resistance / thermocouple is installed, its insertion depth shall not be less than 8 ~ 10 times of the outer diameter of the thermal resistance protection tube;
    Increase the heating part of thermal resistance / thermocouple as much as possible;
    The thermal resistance / thermocouple shall be installed vertically as far as possible to prevent bending and deformation at high temperature.
    In order to reduce the error during the use of thermal resistance / thermocouple, the surface of protective sleeve shall be close to the temperature of measured medium as much as possible;
    When installing the product, the stressed part is "process connection hexagonal wrench position", and the wrench specification corresponds to the hexagonal wrench position;
    It is strictly prohibited that the medium temperature, pressure range and excitation voltage of the measured system exceed the rated service range of the transmitter;
    Pay attention to protect the sensor / transmitter cable or compensation wire;
    Try to avoid direct access to user devices or electrical appliances causing interference;

    常見問題
    我要提建議
    姓名
    聯系電話
    聯系QQ
    聯系微信
    電子郵箱
    地址
    建議內容
    佛山市普量電子有限公司

    電話:0757-26619568 傳真: 0757-26619508

    24小時在線技術支持:13790092618

    云平臺:www.puliangiot.com

    地址:佛山市順德區容桂街道華口社區華天南一路2號杰森家電智造中心3棟202號

    版權所有©佛山市普量電子有限公司