午夜在线不卡精品国产婷婷_亚洲一级黄色毛片全部_毛片大全**在线_最新av一区二区三区影院_一本大道大色av香蕉网_麻豆国产av尤物网尤物_午夜爱爱免费视频无遮挡_717影院理论午夜论不卞_最近2019年中文字幕完整版免费_一个人的视频www片免费

工業型485壓力變送器PT500-2088T
    型號:PT500-2088T
    進口壓力芯體;
    小量程芯片:充油硅芯片;
    大量程芯片:壓阻式厚膜芯片;
    32bit微處理器和24bit ADC高精度、穩定、數字放大電路;
    零點、滿度,溫補、線性補償;
    MODBUS RS485-RTU數字輸出/低功耗RS485-RTU數字輸出;
    工業級2088鑄鋁合金防爆殼體;

    常用關鍵字:
    RS485壓力變送器 數字壓力傳感器
    Modbus壓力變送器 485-RTU壓力傳感器
    工業級數字壓力變送器 智能數字壓力變送器
    產品優勢:

    芯       片:
    進口壓力芯體;
    小量程芯片:充油硅芯片;
    大量程芯片:壓阻式厚膜芯片;
    零點、滿度,溫補、線性補償;
    100萬次使用壽命以上;

    信號處理及輸出:
    32bit微處理器和24bit ADC;
    DSP數字信號調理算法;
    多點性線溫度校準;
    電壓電流過載保護;
    MODBUS RS485-RTU數字輸出/低功耗RS485-RTU數字輸出兩種類型輸出方式;
    低功耗型:待機電流小于50uA,采集電流小于2mA;
    采集間隔0~43200秒(12小時)可設,既可連續采集,滿足高速采集的場合;
    也可單次觸發采集,最大限度降低功耗;
    工業及設計,適合DCS系統、組態軟件、PLC系統;

    結       構:
    厚膜結構:深度氬弧焊接,連接彈性材料與過程接頭,強度高,抗沖擊,耐疲勞;
    溥膜結構:激光焊接,連接彈性材料與過程接頭,硅油介質傳遞壓力,響應快,耐疲勞,小量程;
    工業級2088鑄鋁合金防爆殼體,強度可靠堅固;
    整體結構小巧,過程連接方式多樣化(M20X1.5,G1/2 ,ZG1/2,1/2NPT(螺紋小徑≥17mm)DN50等);
    過程連接材料:304或316;

    應      用:
    油壓、水壓、氣壓壓力測量與監控;
    工業/電力/石油/自動化等領域的設備壓力測量

    Chip:
    Inlet pressure core body;
    Small range chip: oil filled silicon chip;
    Large range chip: piezoresistive thick film chip;
    Zero point, fullness, temperature compensation and linear compensation;
    More than 1 million times of service life;

    Signal processing and output:
    32 bit microprocessor and 24 bit ADC;
    DSP digital signal conditioning algorithm;
    Multipoint linear temperature calibration;
    Voltage and current overload protection;
    Two kinds of low power consumption of RS485 digital output mode are provided;
    Low power consumption: standby current is less than 50ua, acquisition current is less than 2mA;
    The acquisition interval of 0 ~ 43200 seconds (12 hours) can be set, which can not only continuously collect data, but also meet the needs of high-speed acquisition;
    It can also trigger acquisition once to minimize power consumption;
    Industrial and design, suitable for DCS system, configuration software, PLC system;

    Structure:
    Thick film structure: deep argon arc welding, connecting elastic material and process joint, high strength, impact resistance and fatigue resistance;
    PU film structure: laser welding, connecting elastic material and process joint, transmitting pressure with silicone oil medium, fast response, fatigue resistance, 

    small range;
    Industrial grade 2088 cast aluminum alloy explosion-proof shell with reliable strength;
    The overall structure is compact, and the process connection mode is diversified (m20x1.5, G1 / 2, ZG1 / 2, 1 / 2NPT (thread diameter ≥ 17mm) DN50, etc.);
    Process connection material: 304 or 316;

    Application:
    Measurement and monitoring of oil pressure, water pressure and air pressure;
    Pressure measurement of equipment in industrial / power / Petroleum / automation fields

    應用領域:
    • 智慧消防

    • 蒸汽供給系統

    • 油壓系統

    • 冶金設備

    規格參數
    一、技術參數
    測量介質:液體、氣體(與產品過程連接材料兼容)
    壓力形式:表壓、絕壓
    量    程:0~0.6、1、2、5、10、15、20、25、30、40、50、60、100(MPa);
                0~10、20、30、50、100、150、200、300、400、500、600(KPa);
                -100KPa~10KPa~40MPa; 
      ±10KPa~±100KPa;
    綜合精度:±0.25%FS;±0.5%FS;±1%FS
    非 線 性:≤0.25%FS
    重 復 性:≤0.1%FS
    輸出信號:MODBUS RS485-RTU(四線制)
                  低功耗MODBUS RS485-RTU(四線制)
    供電電壓:通用型:24VDC(9~30VDC) 
                  低功耗型:3.6VDC(3.1~6.1VDC)
    壽    命:≥100萬次
    絕緣阻抗:≥1000 MΩ/100VDC
    負載阻抗:電流輸出: ≤800Ω; 
    介質溫度:-20~80℃
    環境溫度:-20~70℃
    補償溫度:0~70℃
    響應時間:≤5mS
    過載壓力:150%FS
    破壞壓力:3倍量程(量程小于40MPa);2倍量程(量程大于41MPa)
    電氣連接:防水緊線螺母直接出線,可配套防爆電氣連接
    防護等級:IP65/IP68
    連接電纜:四芯屏蔽電纜,標準長度:3米
    連接材料:304/316L
    過程連接:M20X1.5,G1/2,ZG1/2,1/2NPT,DN50……可用戶制訂規格

    二、規格型號

    三、結構尺寸

    四、電氣連接

    五、安裝方式

    Technical parameters
    Pressure form: gauge pressure, absolute pressure
    Range: 0 ~ 0.6, 1, 2, 5, 10, 15, 20, 25, 30, 40, 50, 60, 100 (MPA);
           0~10、20、30、50、100、150、200、300、400、500、600(KPa);
           -100KPa~10KPa~40MPa;
           ±10KPa~±100KPa;
    Comprehensive accuracy: ± 0.25% FS; ± 0.5% FS; ± 1% FS
    Non linear: ≤ 0.25% FS
    Repeatability: ≤ 0.1% FS
    Output signal: 
          Modbus rs485-rtu (four wire system)
          Low power consumption Modbus rs485-rtu (four wire system)
    Power supply voltage: 
          universal type: 24 VDC (9 ~ 30 VDC)
          Low power consumption type: 3.6vdc (3.1 ~ 6.1vdc)
    Service life: ≥ 1 million times
    Insulation impedance: ≥ 1000m Ω / 100VDC
    Load impedance: current output: ≤ 800 Ω;
    Medium temperature: - 20-80 ℃
    Ambient temperature: - 20 ~ 70 ℃
    Compensation temperature: 0 ~ 70 ℃
    Response time: ≤ 5ms
    Overload pressure: 150% FS
    Failure pressure: 3 times of range (range less than 40MPa); 2 times of range (range greater than 41mpa)
    Electrical connection: direct outgoing line of waterproof fastening nut, supporting explosion-proof electrical connection
    Protection grade: IP65 / IP68
    Connecting cable: four core shielded cable, standard length: 3M
    Connection material: 304 / 316L
    Process connection: m20x1.5, G1/2, ZG1/2, 1/2NPT, DN50 Specifications can be made by users
    訂購注意事項
    PT500-2088T產品訂購注意事項
    1、產品量程選擇:
       為了使產品精度、壽命、穩定性等功能達到最佳效果,產品的量程選擇參照以下公式計算:
       量程 = 系統最大壓力 X (1.2-1.5)倍;
       產品的實際測量壓力范圍,應該在量程范圍的15%-80%;

    2、產品供電及輸出:
       供電范圍的選擇按產品的個輸出規格確定:
       通用RS485-RTU輸出,直流12-30VDC供電;
       低功耗RS485-RTU輸出,直流3.1-6.1VDC;
       RS485-RTU輸出時,請先了解通訊協議;

    3、用戶要了解產品的測量介質特性:
       介質規格、介質溫度、介質純度(是否含有雜質或顆粒等);

    4、用戶要了解產品的安裝環境及安裝方式:
       室內或室外安裝;
       環境溫度;
       要求的密封等級;
       設備的振動范圍;
       安裝方式:螺紋、法蘭、特殊結構;
       安裝空間是否滿足產品外形尺寸;

    1. Product range selection:
    In order to achieve the best effect of product accuracy, life, stability and other functions, the range selection of the product is calculated by referring to the following formula:
    Range = x (1.2-1.5) times of the maximum system pressure;
    The actual measuring pressure range of the product should be 15% - 80% of the range;

    2. Product power supply and output:
    The selection of power supply range is determined according to the output specifications of the product:
    General rs485-rtu output, DC 12-30vdc power supply;
    Low power rs485-rtu output, DC 3.1-6.1vdc;
    When output rs485-rtu, please understand the communication protocol first;

    3. The user should understand the measurement medium characteristics of the product:
    Medium specification, medium temperature, medium purity (whether containing impurities or particles, etc.);

    4. Users should understand the installation environment and installation method of the product:
    Indoor or outdoor installation;
    Ambient temperature;
    Required sealing level;
    Vibration range of equipment;
    Installation method: thread, flange, special structure;
    Whether the installation space meets the overall dimension of the product;

    使用注意事項
    產品供電范圍,9-30VDC(低功耗RS485輸出型為3.1-5VDC)
    嚴禁使用硬物(如:螺絲刀、手指、鐵釘?shù)龋┤ナ沟脡毫δて軌毫y量輸出;
    電源和信號線按訂購產品規格要求,正確接線;
    產品安裝時,受力部位為“過程連接六方扳手位”,扳手規格與六方相對應;
    嚴禁被測系統的介質溫度、壓力量程、激勵電壓超過變送器的額定使用范圍;
    注意保護變送器引出電纜,現場使用跨度過大時,建議使用金屬管保護或架空;
    壓力變送器屬精密計量儀器,切勿強加沖擊、摔打,以免損壞芯體
    產品安裝于通風、干燥、無強腐蝕環境,露天安裝加防護裝置,避免陽光直接照射;
    產品儀表嚴禁進水/漏水/泡水情況,露天安裝加防護裝置,避免陽光直接照射;


    Product power supply range, 9-30vdc (low power RS485 output type is 3.1-5vdc);
    It is strictly prohibited to use hard objects (such as screwdriver, finger, iron nail, etc.) to make the pressure diaphragm output under pressure measurement;
    The power and signal wires shall be correctly wired according to the specifications of the ordered products;
    During product installation, the stressed part is "process connection hexagon wrench position", and the wrench specification corresponds to hexagon;
    It is strictly prohibited that the medium temperature, pressure range and excitation voltage of the tested system exceed the rated use range of the transmitter;
    Pay attention to protect the outgoing cable of the transmitter. When the span is too large on site, it is recommended to use metal pipe for protection or overhead;
    The pressure transmitter is a precision measuring instrument. Do not impose impact or smash to avoid damaging the core
    The product is installed in a ventilated, dry and non corrosive environment, and installed in the open with protective devices to avoid direct sunlight;
    It is strictly prohibited to enter / leak / soak water in the product instrument, and protective devices shall be installed in the open to avoid direct sunlight;

    常見問題
    我要提建議
    姓名
    聯系電話
    聯系QQ
    聯系微信
    電子郵箱
    地址
    建議內容
    佛山市普量電子有限公司

    電話:0757-26619568 傳真: 0757-26619508

    24小時在線技術支持:13790092618

    云平臺:www.puliangiot.com

    地址:佛山市順德區容桂街道華口社區華天南一路2號杰森家電智造中心3棟202號

    版權所有©佛山市普量電子有限公司